Semiconductors are moving away from rigid substrates, which are cut or formed into thin discs or wafers, to more flexible plastic material and even paper thanks to new material and fabrication discoveries. The trend toward more flexible substrates has led to fabrication of numerous devices, from light-emitting diodes to solar cells and transistors.
Read more Stanford Researchers Develop Ultrathin, Flexible Circuits for Wearables
Georgia Tech researchers have created a material that acts like a second skin layer and is up to 200% more stretchable than its original dimension without significantly losing its electric current. The researchers say the soft flexible photodetectors could enhance the utility of medical wearable sensors and implantable devices, among other applications.
Photodetectors today are used as wearables for health monitoring, such as rigid fingertip pulse oximeter reading devices. They convert light signals into electrical ones and are commonly used on wearable electronics.
Given that conventional flexible semiconductors break under a few percentages of strain, the Georgia Tech findings are “an order-of-magnitude improvement,” said Olivier Pierron, professor in the George W. Woodruff School of Mechanical Engineering, whose lab measures the mechanical properties and reliability of flexible electronics under extreme conditions, reports Georgia Tech.
“Think of a rubber band or something that’s soft and stretchable like human skin yet has similar electrical semiconducting properties of solid or rigid semiconductors,” said Canek Fuentes-Hernandez, a co-PI formerly in the School of Electrical and Computer Engineering (ECE) and now an associate professor in Electrical and Computer Engineering at Northeastern University in Boston. “We’ve shown that you can build stretchability into semiconductors that retains the electrical performance needed to detect light levels that are around hundred million times fainter than produced by a light bulb used for indoor illumination,” he said.
Bernard Kippelen, vice provost for International Initiatives and an ECE professor, oversaw the work of Youngrak Park, the study’s first author and a Ph.D. candidate in ECE. Following two-and-a-half years of research, Park uncovered the right combination of chemical compounds that produced a super-soft material with the ability to generate and conduct electricity when exposed to light.
Park found the perfect ratio for all parts of the semiconductor layer to maintain high performance in the photodetector. But it was painstaking work to prove the materials’ stretchability, especially given that a single layer was 1,000 times thinner than a human hair.
Park relied on Kyungjin Kim, then a Georgia Tech Ph.D. mechanical engineering student, to test the material’s reliability. He continued to provide Kim with larger, thicker samples until one with a thickness of 500 nanometers worked.
“It was still super thin. Under dry conditions, it would just crumble. We had to use a water reservoir to keep its shape,” recalled Kim, now an assistant professor in the University of Connecticut’s Department of Mechanical Engineering.
To test for electrical signals coming out of the device under illumination, electronic terminals had to be embedded on it. Yet, those terminals had to be deformable, too, or the entire device would become rigid.
“Fabricating stretchable electronic terminals was a major challenge in and of itself,” said ECE PhD graduate Felipe Andres Larrain, who worked closely with Park and focused on the embedded components. He is now an assistant professor at Adolfo Ibáñez University in Chile.
While this breakthrough material has been initially integrated into a photodetector and tested for electrical functionality, more testing and optimization is needed to show the materials’ stretchability under multimodal loads and its shelf stability.
“What’s exciting is what these materials and the devices will enable us to develop―namely, the concept of intelligence systems. You have functional surfaces that combine sensors that monitor all kinds of physical properties,” said Graham, former chair of the Woodruff School of Mechanical Engineering and now Dean of Engineering at the University of Maryland.
“This is a very good example of interdisciplinary research — none of this work would have been possible without the collaboration between electrical and mechanical engineers,” Kippelen said. “In the lab we didn’t have any prior experience with stretchable materials. Figuring out how to measure this took a lot of perseverance, creativity and hard work.”
The researchers are most excited about the potential of the material to enhance medical wearables. Typically, wristwatches that use rigid biosensors have limitations since flexing the wrist can completely change the sensor’s measurements. They are subject to “motion artifact,” or degraded image quality, caused when a person moves.
The research team foresees rich applications for the soft and stretchable polymer blend beyond wearables for health monitoring. “The soft device also could be attractive for implantable electronics for bio-electronic applications since the interfaces comply with the dynamic motion of the soft biological tissues, reducing the foreign body reaction,” said Kim.
Read more Stretchable System Can Power Wearables By Harvesting Energy From Wearer’s Breathing and Motion
“The potential is fantastic,” added Larrain. “In the long-term, you could develop sensors that could enhance or even replace the human eye or be applied to robotic eyes.”
Fuentes sees the material working in smart agriculture applications, where farmers could attach light sensors into fruits or other produce to monitor growth, disease and to better time harvesting.
Kippelen believes the rubber-like photodiodes that detect ultralow light levels could find applications in detecting, identifying, and characterizing ionizing radiation for nuclear fuel cycle monitoring.
