MIT Researchers Develop Touch-Sensing Glove That May Help In Stroke Recovery

When you pick up a balloon, the pressure to keep hold of it is different from what you would ...

When volunteers wore the glove while picking up a balloon versus a beaker, the sensors generated pressure maps specific to each task. Holding a balloon produced a relatively even pressure signal across the entire palm, while grasping a beaker created stronger pressure at the fingertips. The glove could help restore motor function after stroke and enhance virtual gaming experiences. (Image: Courtesy of the researchers)

When you pick up a balloon, the pressure to keep hold of it is different from what you would exert to grasp a jar. And now engineers at MIT and elsewhere have a way to precisely measure and map such subtleties of tactile dexterity.

Read more: Thermal Display Glove Enable Users to Feel Virtual Temperatures in Real-Time

The team has designed a new touch-sensing glove that can “feel” pressure and other tactile stimuli. The inside of the glove is threaded with a system of sensors that detects, measures, and maps small changes in pressure across the glove. The individual sensors are highly attuned and can pick up very weak vibrations across the skin, such as from a person’s pulse.

When subjects wore the glove while picking up a balloon versus a beaker, the sensors generated pressure maps specific to each task. Holding a balloon produced a relatively even pressure signal across the entire palm while grasping a beaker created stronger pressure at the fingertips.

The researchers say the tactile glove could help to retrain motor function and coordination in people who have suffered a stroke or other fine motor conditions. The glove might also be adapted to augment virtual reality and gaming experiences. The team envisions integrating the pressure sensors not only into tactile gloves but also into flexible adhesives to track pulse, blood pressure, and other vital signs more accurately than smart watches and other wearable monitors, reports Jennifer Chu in MIT News.

“The simplicity and reliability of our sensing structure hold great promise for a diversity of health care applications, such as pulse detection and recovering the sensory capability in patients with tactile dysfunction,” says Nicholas Fang, professor of mechanical engineering at MIT.

Fang and his collaborators detail their results in a study in Nature Communications. The study’s co-authors include Huifeng Du and Liu Wang at MIT, along with professor Chuanfei Guo’s group at the Southern University of Science and Technology (SUSTech) in China.

The glove’s pressure sensors are similar in principle to sensors that measure humidity. the team fabricated thin, kernel-sized sensing electrodes lined with thousands of gold microscopic filaments, or “micropillars.” They demonstrated that they could accurately measure the degree to which groups of micropillars bent in response to various forces and pressures. When they placed a sensing electrode and a control electrode onto a volunteer’s fingertip, they found the structure was highly sensitive. The sensors were able to pick up subtle phases in the person’s pulse, such as different peaks in the same cycle. They could also keep up accurate pulse readings, even as the person wearing the sensors waved their hands as they walked across a room.

“Pulse is a mechanical vibration that can also cause deformation of the skin, which we can’t feel, but the pillars can pick up,” Fang says.

The researchers then applied the concepts of their new, micropillared pressure sensor to the design of a highly sensitive tactile glove. They started with a silk glove, which the team purchased off the shelf. To make pressure sensors, they cut out small squares from carbon cloth, a textile that is composed of many thin filaments similar to micropillars.

They turned each cloth square into a sensing electrode by spraying it with gold, a naturally conductive metal. They then glued the cloth electrodes to various parts of the glove’s inner lining, including the fingertips and palms, and threaded conductive fibers throughout the glove to connect each electrode to the glove’s wrist, where the researchers glued a control electrode.

Several volunteers took turns wearing the tactile glove and performing various tasks, including holding a balloon and gripping a glass beaker. The team collected readings from each sensor to create a pressure map across the glove during each task. The maps revealed distinct and detailed patterns of pressure generated during each task.

The team plans to use the glove to identify pressure patterns for other tasks, such as writing with a pen and handling other household objects. Ultimately, they envision such tactile aids could help patients with motor dysfunction to calibrate and strengthen their hand dexterity and grip.

Read more: NeoMano Robotic Glove Helps People with Paralyzed Hands to Grip Objects

“Some fine motor skills require not only knowing how to handle objects but also how much force should be exerted,” Fang says. “This glove could provide us more accurate measurements of gripping force for control groups versus patients recovering from stroke or other neurological conditions. This could increase our understanding, and enable control.”

Sam Draper
August 16, 2021

Innovation of the Month

Do you want to discover more, visit the website
Visit Website

Other news

PainQ: Home Wearable Pain Management System

PainQ for pain management and CobiQ for rhinitis management are two primary products of Hexainnoheal

NTU Researchers Develop Way to Detect Depression Risk Using Data from Wearables

Researchers have developed a predictive computer program that uses data from wearable technology...

Diodes’ Enhanced Sounder Driver Delivers Higher Performance at a Lower Voltage

Diodes Inc., an American manufacturer and supplier of discrete...

Hyundai Develops Lighter Exoskeleton to Ease Burden in Overhead Work

Jobs like car mechanics require workers to lift one of....
Discover more